The versatile Adapt-A-Door puts an end to problems with replacing or retrofitting doors for Walk-Ins and refrigerated warehouses. Three varieties make it easy to replace a worn-out or ill-fitting door in any Walk-In or warehouse. You can also use the Bally Adapt-A-Door for the easiest way to install a new door where you need it.
The same super-insulating poured-foam urethane that protects every Bally panel is foamed into the Adapt-A-Door.
The door is supported by heavy-duty, spring-loaded hinges and comes with a durable latch assembly.
You can cut this outstanding door into an ordinary masonry wall. In most replacement situations, the Adapt-A-Door is better than the original equipment!
The Adapt-A-Door will swing freely and seal tightly for years.
Three Types of Adapt-A-Doors to fit your specific needs:
1 Cooler Door with 3-sided frame
2 Freezer Door with 3-sided frame
3 Cooler/Freezer Door with 4-sided frame
Loop heaters are located in the frame. Use with new construction, or for retrofit & replacement on any less-floor cooler.
Loop heaters are located in the frame; additional heater and gasket supplied at bottom of door. Use for replacement or retrofit on any less-floor freezer
Heat and gasketing around perimeter of the door frame. Use for applications with raised insulated floors; new, retrofit or replacement
Features
Accessories
• Rugged metal-capped wood frame specially
treated to resist moisture.
• Anti-condensate heaters.
• Poured-in-place, non-ozone depleting,
urethane foam insulation.
• Durable, positive magnetic gasket seal.
• Heavy-duty hinges and latch assemblies.
• Door closers standard on doors up to 42" wide.
• Right or left-hand swing.
• Mounting kit.
• Observation Windows
• Diamond tread kickplates
• Lockingbars
• Trim
